Discussion:
[Ipmitool-devel] help needed - "ipmitool channel info" output
Zdenek Styblik
2013-09-06 03:55:30 UTC
Permalink
Hello,

please, can somebody send me output of the following command:

for I in $(seq 0 15); do printf "### Channel %i\n" $I; ipmitool
channel info $I; done;

Many thanks in advance,
Z.
Ales Ledvinka
2013-09-06 08:15:23 UTC
Permalink
Anyway... not sure what is that for, but did you see the Table 6-1, Channel Number Assignments?

(ipmitool-1.8.11-14.el6_4.1.x86_64)
for I in $(seq 0 15); do printf "### Channel %i\n" $I; ipmitool channel info $I; done;
### Channel 0
Channel 0x0 info:
Channel Medium Type : IPMB (I2C)
Channel Protocol Type : IPMB-1.0
Session Support : session-less
Active Session Count : 0
Protocol Vendor ID : 7154
### Channel 1
Channel 0x1 info:
Channel Medium Type : 802.3 LAN
Channel Protocol Type : IPMB-1.0
Session Support : multi-session
Active Session Count : 1
Protocol Vendor ID : 7154
Volatile(active) Settings
Alerting : disabled
Per-message Auth : disabled
User Level Auth : disabled
Access Mode : always available
Non-Volatile Settings
Alerting : disabled
Per-message Auth : disabled
User Level Auth : disabled
Access Mode : always available
### Channel 2
Channel 0x2 info:
Channel Medium Type : Serial/Modem
Channel Protocol Type : IPMB-1.0
Session Support : single-session
Active Session Count : 0
Protocol Vendor ID : 7154
### Channel 3
Channel 0x3 info:
Channel Medium Type : System Interface
Channel Protocol Type : KCS
Session Support : session-less
Active Session Count : 0
Protocol Vendor ID : 7154
### Channel 4
Channel 0x4 info:
Channel Medium Type : System Interface
Channel Protocol Type : KCS
Session Support : session-less
Active Session Count : 0
Protocol Vendor ID : 7154
### Channel 5
Channel 0x5 info:
Channel Medium Type : System Interface
Channel Protocol Type : KCS
Session Support : session-less
Active Session Count : 0
Protocol Vendor ID : 7154
### Channel 6
Get Channel Info failed: Invalid data field in request
### Channel 7
Get Channel Info failed: Invalid data field in request
### Channel 8
Get Channel Info failed: Invalid data field in request
### Channel 9
Get Channel Info failed: Invalid data field in request
### Channel 10
Get Channel Info failed: Invalid data field in request
### Channel 11
Get Channel Info failed: Invalid data field in request
### Channel 12
Get Channel Info failed: Invalid data field in request
### Channel 13
Get Channel Info failed: Invalid data field in request
### Channel 14
Channel 0x4 info:
Channel Medium Type : System Interface
Channel Protocol Type : KCS
Session Support : session-less
Active Session Count : 0
Protocol Vendor ID : 7154
### Channel 15
Channel 0xf info:
Channel Medium Type : System Interface
Channel Protocol Type : KCS
Session Support : session-less
Active Session Count : 0
Protocol Vendor ID : 7154



slightly modified command
(ipmitool-1.8.12-13073104.fc18.x86_64)
for I in $(seq 0 15); do printf "### Channel %i\n" $I; ipmitool -H ... -U ... -P ... channel info $I; done
### Channel 0
Channel 0x0 info:
Channel Medium Type : IPMB (I2C)
Channel Protocol Type : IPMB-1.0
Session Support : session-less
Active Session Count : 0
Protocol Vendor ID : 7154
### Channel 1
Channel 0x1 info:
Channel Medium Type : 802.3 LAN
Channel Protocol Type : IPMB-1.0
Session Support : multi-session
Active Session Count : 2
Protocol Vendor ID : 7154
Volatile(active) Settings
Alerting : disabled
Per-message Auth : disabled
User Level Auth : disabled
Access Mode : always available
Non-Volatile Settings
Alerting : disabled
Per-message Auth : disabled
User Level Auth : disabled
Access Mode : always available
### Channel 2
Channel 0x2 info:
Channel Medium Type : Serial/Modem
Channel Protocol Type : IPMB-1.0
Session Support : single-session
Active Session Count : 0
Protocol Vendor ID : 7154
### Channel 3
Channel 0x3 info:
Channel Medium Type : System Interface
Channel Protocol Type : KCS
Session Support : session-less
Active Session Count : 0
Protocol Vendor ID : 7154
### Channel 4
Channel 0x4 info:
Channel Medium Type : System Interface
Channel Protocol Type : KCS
Session Support : session-less
Active Session Count : 0
Protocol Vendor ID : 7154
### Channel 5
Channel 0x5 info:
Channel Medium Type : System Interface
Channel Protocol Type : KCS
Session Support : session-less
Active Session Count : 0
Protocol Vendor ID : 7154
### Channel 6
Get Channel Info failed: Invalid data field in request
### Channel 7
Get Channel Info failed: Invalid data field in request
### Channel 8
Get Channel Info failed: Invalid data field in request
### Channel 9
Get Channel Info failed: Invalid data field in request
### Channel 10
Get Channel Info failed: Invalid data field in request
### Channel 11
Get Channel Info failed: Invalid data field in request
### Channel 12
Get Channel Info failed: Invalid data field in request
### Channel 13
Get Channel Info failed: Invalid data field in request
### Channel 14
Channel 0x1 info:
Channel Medium Type : 802.3 LAN
Channel Protocol Type : IPMB-1.0
Session Support : multi-session
Active Session Count : 2
Protocol Vendor ID : 7154
Volatile(active) Settings
Alerting : disabled
Per-message Auth : disabled
User Level Auth : disabled
Access Mode : always available
Non-Volatile Settings
Alerting : disabled
Per-message Auth : disabled
User Level Auth : disabled
Access Mode : always available
### Channel 15
Channel 0xf info:
Channel Medium Type : System Interface
Channel Protocol Type : KCS
Session Support : session-less
Active Session Count : 0
Protocol Vendor ID : 7154


----- Original Message -----
From: "Zdenek Styblik" <***@gmail.com>
To: "ipmitool-devel" <ipmitool-***@lists.sourceforge.net>
Sent: Friday, September 6, 2013 5:55:30 AM
Subject: [Ipmitool-devel] help needed - "ipmitool channel info" output

Hello,

please, can somebody send me output of the following command:

for I in $(seq 0 15); do printf "### Channel %i\n" $I; ipmitool
channel info $I; done;

Many thanks in advance,
Z.
Zdenek Styblik
2013-09-06 09:55:06 UTC
Permalink
Post by Ales Ledvinka
Anyway... not sure what is that for, but did you see the Table 6-1, Channel Number Assignments?
Yes, I did. But that's not the reason why I'm interested in this
output ;) As for why, may be we'll see sooner or later :)

Thank you for the output.

Z.
Post by Ales Ledvinka
(ipmitool-1.8.11-14.el6_4.1.x86_64)
for I in $(seq 0 15); do printf "### Channel %i\n" $I; ipmitool channel info $I; done;
### Channel 0
Channel Medium Type : IPMB (I2C)
Channel Protocol Type : IPMB-1.0
Session Support : session-less
Active Session Count : 0
Protocol Vendor ID : 7154
### Channel 1
Channel Medium Type : 802.3 LAN
Channel Protocol Type : IPMB-1.0
Session Support : multi-session
Active Session Count : 1
Protocol Vendor ID : 7154
Volatile(active) Settings
Alerting : disabled
Per-message Auth : disabled
User Level Auth : disabled
Access Mode : always available
Non-Volatile Settings
Alerting : disabled
Per-message Auth : disabled
User Level Auth : disabled
Access Mode : always available
### Channel 2
Channel Medium Type : Serial/Modem
Channel Protocol Type : IPMB-1.0
Session Support : single-session
Active Session Count : 0
Protocol Vendor ID : 7154
### Channel 3
Channel Medium Type : System Interface
Channel Protocol Type : KCS
Session Support : session-less
Active Session Count : 0
Protocol Vendor ID : 7154
### Channel 4
Channel Medium Type : System Interface
Channel Protocol Type : KCS
Session Support : session-less
Active Session Count : 0
Protocol Vendor ID : 7154
### Channel 5
Channel Medium Type : System Interface
Channel Protocol Type : KCS
Session Support : session-less
Active Session Count : 0
Protocol Vendor ID : 7154
### Channel 6
Get Channel Info failed: Invalid data field in request
### Channel 7
Get Channel Info failed: Invalid data field in request
### Channel 8
Get Channel Info failed: Invalid data field in request
### Channel 9
Get Channel Info failed: Invalid data field in request
### Channel 10
Get Channel Info failed: Invalid data field in request
### Channel 11
Get Channel Info failed: Invalid data field in request
### Channel 12
Get Channel Info failed: Invalid data field in request
### Channel 13
Get Channel Info failed: Invalid data field in request
### Channel 14
Channel Medium Type : System Interface
Channel Protocol Type : KCS
Session Support : session-less
Active Session Count : 0
Protocol Vendor ID : 7154
### Channel 15
Channel Medium Type : System Interface
Channel Protocol Type : KCS
Session Support : session-less
Active Session Count : 0
Protocol Vendor ID : 7154
slightly modified command
(ipmitool-1.8.12-13073104.fc18.x86_64)
for I in $(seq 0 15); do printf "### Channel %i\n" $I; ipmitool -H ... -U ... -P ... channel info $I; done
### Channel 0
Channel Medium Type : IPMB (I2C)
Channel Protocol Type : IPMB-1.0
Session Support : session-less
Active Session Count : 0
Protocol Vendor ID : 7154
### Channel 1
Channel Medium Type : 802.3 LAN
Channel Protocol Type : IPMB-1.0
Session Support : multi-session
Active Session Count : 2
Protocol Vendor ID : 7154
Volatile(active) Settings
Alerting : disabled
Per-message Auth : disabled
User Level Auth : disabled
Access Mode : always available
Non-Volatile Settings
Alerting : disabled
Per-message Auth : disabled
User Level Auth : disabled
Access Mode : always available
### Channel 2
Channel Medium Type : Serial/Modem
Channel Protocol Type : IPMB-1.0
Session Support : single-session
Active Session Count : 0
Protocol Vendor ID : 7154
### Channel 3
Channel Medium Type : System Interface
Channel Protocol Type : KCS
Session Support : session-less
Active Session Count : 0
Protocol Vendor ID : 7154
### Channel 4
Channel Medium Type : System Interface
Channel Protocol Type : KCS
Session Support : session-less
Active Session Count : 0
Protocol Vendor ID : 7154
### Channel 5
Channel Medium Type : System Interface
Channel Protocol Type : KCS
Session Support : session-less
Active Session Count : 0
Protocol Vendor ID : 7154
### Channel 6
Get Channel Info failed: Invalid data field in request
### Channel 7
Get Channel Info failed: Invalid data field in request
### Channel 8
Get Channel Info failed: Invalid data field in request
### Channel 9
Get Channel Info failed: Invalid data field in request
### Channel 10
Get Channel Info failed: Invalid data field in request
### Channel 11
Get Channel Info failed: Invalid data field in request
### Channel 12
Get Channel Info failed: Invalid data field in request
### Channel 13
Get Channel Info failed: Invalid data field in request
### Channel 14
Channel Medium Type : 802.3 LAN
Channel Protocol Type : IPMB-1.0
Session Support : multi-session
Active Session Count : 2
Protocol Vendor ID : 7154
Volatile(active) Settings
Alerting : disabled
Per-message Auth : disabled
User Level Auth : disabled
Access Mode : always available
Non-Volatile Settings
Alerting : disabled
Per-message Auth : disabled
User Level Auth : disabled
Access Mode : always available
### Channel 15
Channel Medium Type : System Interface
Channel Protocol Type : KCS
Session Support : session-less
Active Session Count : 0
Protocol Vendor ID : 7154
----- Original Message -----
Sent: Friday, September 6, 2013 5:55:30 AM
Subject: [Ipmitool-devel] help needed - "ipmitool channel info" output
Hello,
for I in $(seq 0 15); do printf "### Channel %i\n" $I; ipmitool channel info $I; done;
Many thanks in advance,
Z.
------------------------------------------------------------------------------
Learn the latest--Visual Studio 2012, SharePoint 2013, SQL 2012, more!
Discover the easy way to master current and previous Microsoft technologies
and advance your career. Get an incredible 1,500+ hours of step-by-step
tutorial videos with LearnDevNow. Subscribe today and save!
http://pubads.g.doubleclick.net/gampad/clk?id=58041391&iu=/4140/ostg.clktrk
_______________________________________________
Ipmitool-devel mailing list
https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
Loading...